ESIS Technical Publications

EGF 1

The Behaviour of Short Fatigue Cracks, Eds: K.J. Miller & E.R. de los Rios (1986)

EGF 2

The Fracture Mechanics of Welds, Eds: J.G. Blauel & K.H. Schwalbe (1987)

ECF 3

Biaxial and Multiaxial Fatigue, Eds: M.W. Brown & K.J. Miller

ECF 4

The Assessment of Cracked Components by Fracture Mechanics, Ed: L.H. Larsson

ECF 5

Yielding, Damage and Failure of Anisotropic Solids, Ed: L/H. Larsson (1989)

ECF 6

High Temperature Fracture Mechanisms and Mechanics, Eds: P. Bensussan & J.P. Mascarell (1990)

ECF 7

Environment Assisted Fatigue, Eds: P Scott & R.A. Cottis (1990)

EGF/ESIS 8

Fracture Mechanics Verification by Large Scale Testing, Ed: K. Kussmaul (1991)

ESIS/ECF 9

Defect Assessment in Components - Fundamentals and Applications, Eds: J.G. Blauel & K.H. Schwalbe (1991)

ESIS 10

Fatigue Under Biaxial and Multiaxial Loading, Eds: K. Kussmaul, D.L. McDiarmid & D.F. Socie (1991)

ESIS 11

Mechanics and Mechanisms of Damage in Composites and Multi-Materials, Ed: D. Baptiste (1991)

ESIS 12

High Temperature Structural Design, Ed: L.H. Larsson (1992)

ESIS 13

Short Fatigue Cracks, Eds: K.J. Miller & E.R.de los Rios (1992)

ESIS 14

Mixed-Mode Fatigue and Fracture, Eds: H.P. Rossmanith & K.J. Miller (1993)

ESIS 15

Behaviour of Defects at High Temperature, Eds: R.A. Ainsworth & R.P. Skelton

ESIS 16

Fatigue Design, Eds: J. Solin, G. Marquis, A. Siljander & S. Sipilia (1993)

ESIS 17

Mis-matching of Wels, Eds: K.H. Schwalbe & M. Kocak (1994)

ESIS 18

Fretting Fatigue, Eds: R.B. Waterhouse & T.C. Lindley (1994)

ESIS 19

Impact and Dynamic Fracture of Polymers and Composites, Eds: J.G. Williams & A. Pavan (1995)

ESIS 20

Evaluating Materials Properties by Dynamic Testing, Ed: E van Walle (1996)

ECF 21

Multiaxial Fatigue and Design, Eds: A. Pineau, G. Gailletaud & T.C. Lindley (1996)

ESIS 22

Fatigue Design of Components, Eds: G. Marquis & J. Solin (1997)

ESIS 23

Fatigue Design and Reliability, Eds: G. Marquis & J. Solin (1999)

ESIS 24

Minimum Reinforcement in Concrete Members, Ed: A. Carpinteri (1999)

ESIS 25

Multiaxial Fatigue and Fracture, Eds: E. Macha, W. Bedowski & T. Lagoda

ESIS 26

Fracture Mechanics: Applications and Challenges, Eds: M. Fuentes, M. Elices, A. Martin-Meizoso & J.M. Maritez-Esnaola (2000)

ESIS 27

Fracture of Polymers, Composites and Adhesives, Eds: J.G.Williams & A. Pavan (2000)

ESIS 28

Fracture Mechanics Testing Methods for Polymers, Adhesives and Composites, Eds: D.R. Moore, A. Pavan & J.G. Williams

ESIS Publications 1-21 were published by PROFESSIONAL ENGINEERING PUBLISHING LTD; the puublishing arm of the Institution of Mechanical Engineers, UK. Orders and enquiries should be addressed to PEP Ltd., Northgate Avenue, Bury St. Edmunds, Suffolk, IP32 6BW, UK.
¤ tel: 44 (0)1284 724384
¤ fax: 44 (0)1284 718692
¤ email: sales@imeche.org.uk
¤ website: http://www.imeche.org.uk/

ESIS Publications 22-28 are published by ELSEVIER SCIENCE LTD. Order and enquiries should be addressed to Elsevier Science Ltd., The Boulevard, Langford Lane, Kidlington, Oxford, OX5 1GB, UK.
¤ tel: 44 (0)1865 843297
¤ fax: 44 (0)1865 843958
¤ For direct orders please access www.elsevier.nl/locate/series/esis

EGF 1	The Behaviour of Short Fatigue Cracks, Eds: K.J. Miller & E.R. de los Rios (1986)
EGF 2	The Fracture Mechanics of Welds, Eds: J.G. Blauel & K.H. Schwalbe (1987)
ECF 3	Biaxial and Multiaxial Fatigue, Eds: M.W. Brown & K.J. Miller
ECF 4	The Assessment of Cracked Components by Fracture Mechanics, Ed: L.H. Larsson
ECF 5	Yielding, Damage and Failure of Anisotropic Solids, Ed: L/H. Larsson (1989)
ECF 6	High Temperature Fracture Mechanisms and Mechanics, Eds: P. Bensussan & J.P. Mascarell (1990)
ECF 7	Environment Assisted Fatigue, Eds: P Scott & R.A. Cottis (1990)
EGF/ESIS 8	Fracture Mechanics Verification by Large Scale Testing, Ed: K. Kussmaul (1991)
ESIS/ECF 9	Defect Assessment in Components - Fundamentals and Applications, Eds: J.G. Blauel & K.H. Schwalbe (1991)
ESIS 10	Fatigue Under Biaxial and Multiaxial Loading, Eds: K. Kussmaul, D.L. McDiarmid & D.F. Socie (1991)
ESIS 11	Mechanics and Mechanisms of Damage in Composites and Multi-Materials, Ed: D. Baptiste (1991)
ESIS 12	High Temperature Structural Design, Ed: L.H. Larsson (1992)
ESIS 13	Short Fatigue Cracks, Eds: K.J. Miller & E.R.de los Rios (1992)
ESIS 14	Mixed-Mode Fatigue and Fracture, Eds: H.P. Rossmanith & K.J. Miller (1993)
ESIS 15	Behaviour of Defects at High Temperature, Eds: R.A. Ainsworth & R.P. Skelton
ESIS 16	Fatigue Design, Eds: J. Solin, G. Marquis, A. Siljander & S. Sipilia (1993)
ESIS 17	Mis-matching of Wels, Eds: K.H. Schwalbe & M. Kocak (1994)
ESIS 18	Fretting Fatigue, Eds: R.B. Waterhouse & T.C. Lindley (1994)
ESIS 19	Impact and Dynamic Fracture of Polymers and Composites, Eds: J.G. Williams & A. Pavan (1995)
ESIS 20	Evaluating Materials Properties by Dynamic Testing, Ed: E van Walle (1996)
ECF 21	Multiaxial Fatigue and Design, Eds: A. Pineau, G. Gailletaud & T.C. Lindley (1996)
ESIS 22	Fatigue Design of Components, Eds: G. Marquis & J. Solin (1997)
ESIS 23	Fatigue Design and Reliability, Eds: G. Marquis & J. Solin (1999)
ESIS 24	Minimum Reinforcement in Concrete Members, Ed: A. Carpinteri (1999)
ESIS 25	Multiaxial Fatigue and Fracture, Eds: E. Macha, W. Bedowski & T. Lagoda
ESIS 26	Fracture Mechanics: Applications and Challenges, Eds: M. Fuentes, M. Elices, A. Martin-Meizoso & J.M. Maritez-Esnaola (2000)
ESIS 27	Fracture of Polymers, Composites and Adhesives, Eds: J.G.Williams & A. Pavan (2000)
ESIS 28	Fracture Mechanics Testing Methods for Polymers, Adhesives and Composites, Eds: D.R. Moore, A. Pavan & J.G. Williams